Telephone: 03 9796 3100

Top Frame for Mist Jets .032 & .048

Top Frame for Mist Jets .032 & .048
Product Code: 1-4C-ISVPT/F2

Top Frame to suit Mist Jets .032 & .048

Includes molded frame and anvil.

The Sage Horticultural range of Mist Jets contain sprays that are precision made under strict quality control conditions to emit a consistant, gentle mist required by propagators and growers of fine plants.

By supplying a wide range of adaptors means that sprays can be fitted to virtually any pipe work system, either new or existing. the 1/2’ B.S.P. adaptor is fitted with an integral nylon mesh filter which can easily be removed for cleaning. A full range of spare parts is available, allowing change overs to be made on site.

When mounting the Mist Jets overhead, the fitting of a non drip valve is recommended. We can supply a drip valve with a 1/4” B.S.P. adaptor. this means the Mist Jest can also be installed on any existing 1/2’ B.S.P. installations. The valve operates at a pressure of 4 p.s.i., thus ensuring a positive shut off without restricting the effectiveness of the mist spray. When mounting overhead, depending on the height of the jets, spacing between the jets can be increased up to 30%.

When mounting the Mist Jets on risers, the minimum height of the spray above the plants is 500mm. There is no maximum height restrictions when installing on a riser.    

2019 All Rights Reserved | PHP Developers - WWWShop